Canon-imageRUNNER-2870 E713 0000 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-2870 E713 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-2870 E713 0000 Error Code
E713 0000
Description :
There is an error in the communication with the finisher.
Causes :
The communication with the finisher does not resume within 5 sec after it has been disrupted.
Solutions :
Check the cable.
Replace the DC controller PCB.
Replace the finisher controller PCB.
If you are reading this article and have exposure to this malfunction and would like to share please leave a comment beneath. Or, if you have read this article and have more questions then ask. If I have information about the issue then I will respond.
Keep in mind, not every error is absolutely the same. What treats the trouble one occasion may possibly not resolve it the next occasion. While the data in this piece of content is obtained from the service manual and usually ought to get your product ready to go, on occasion other factors could possibly be in play.
