Canon-imageRUNNER-2870 E674 0001 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-2870 E674 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-2870 E674 0001 Error Code
E674 0001
Description :
An error has occurred in communication between the fax control PCB (2-line) and main controller PCB.
Causes :
An attempt to set mode for the fax device has failed.
Solutions :
1. Check the connection of the cable between the fax control PCB (2-line) and the main controller PCB.
2. Replace the ROM DIMM of the fax control PCB (2-line).
3. Replace the fax control PCB (2-line).
4. Replace the main controller PCB.
If you are reading this article and have expertise in this problem and wish to share make sure you leave a comment down the page. Or, if you have read this article and have further questions then ask. If I have knowledge about the problem then I will answer back.
Just remember, not every error is totally the same. What remedies the problem one occasion will possibly not take care of it the next occasion. While the tips in this writing originates from the service manual and normally should get your unit operating, at times other elements might be in play.
