Canon-imageRUNNER-2870 E248 0000 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-2870 E248 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-2870 E248 0000 Error Code
E248 0000
Description :
The backup memory is faulty.
Causes :
[Cause] A check error has occurred on the backup SRAM board.
[Location] bottom ROM
[Timing of Detection] once when the boot ROM is started up
Solutions :
1. Check the presence/absence of a backup SRAM PCB.
2. Disconnect and then connect the backup SRAM PCB.
3. Replace the backup SRAM PCB with a new one.
If you are looking over this write-up and have exposure to this error message and want to share be sure to leave a comment underneath. Or, if you have read this article and have additional questions then ask. If I have exposure to the difficulty then I will answer back.
Just remember, not every error is simply alike. What remedies the difficulty one occasion might not resolve it the next time. While the tips in this post is taken from the service manual and usually should get your product operating, at times other causes can be in play.
