Canon-imageRUNNER-2870 E202 0002 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-2870 E202 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-2870 E202 0002 Error Code
E202 0002
Description :
There is an error in the detection of the CIS home position.
Causes :
The attempt to detect the home position fails when the CIS is moved back.
Solutions :
Disconnect and then connect the harness connector.
Replace the following as necessary: scanner home position sensor, scanner motor, reader controller PCB.
If you are looking over this write-up and have experience with this malfunction and want to share please make sure to leave a comment beneath. Or, if you have read this article and have more questions then ask. If I have information about the situation then I will respond.
Just remember, not every error is precisely the same. What remedies the situation one occasion may possibly not resolve it the next occasion. While the specifics in this document originates from the service manual and usually ought to get your product operational, in some cases other factors can be in play.
