Canon-imageRUNNER-2870 E110 0003 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-2870 E110 0003 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-2870 E110 0003 Error Code
E110 0003
Description :
The scanner motor is faulty.
Causes :
With the image clock switched over, the scanner motor speed lock signal does not indicate a locked state 6.5 sec after a switchover is made from low to normal speed or 8 sec after a switchover is made from normal to low speed.
Solutions :
Replace the laser unit.
Replace the DC controller PCB.
Check the wiring.
If you are looking over this short article and have knowledge of this problem and would wish to share be sure to leave a comment below. Or, if you have read this article and have more questions then ask. If I have information about the situation then I will answer.
Just remember, not every error is precisely identical. What treats the malfunction one occasion may not solve it the next occasion. While the specifics in this document hails from the service manual and usually ought to get your machine operational, from time to time other variables could possibly be in play.
