Canon-imageRUNNER-2870 E064 0004 Error Code

 

Canon-imageRUNNER-2870 E064 0004 Error Code Instructions

Below you will find the service manual information for the Canon-imageRUNNER-2870 E064 0004 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it. 

Canon-imageRUNNER-2870 E064 0004 Error Code

Service Manual Instructions for the Canon-imageRUNNER-2870 E064 0004 Error Code

E064 0004
Description :
The voltage of the power supply is faulty (high-voltage error).

Causes :
While output is being generated, the AD value of the transfer output current is 205 (DEC) or more for 100 msec 2 times in sequence. (However, after output, it is not detected for 100 msec.)




Solutions :
Replace the high-voltage power supply.
Replace the controller PCB.



If you are looking over this short article and have knowledge about this error and desire to make a contribution be sure to leave a comment down the page. Or, if you have read this article and have further questions then ask. If I have knowledge about the difficulty then I will respond.

Just remember, not every error is exactly the same. What treats the situation one occasion will possibly not take care of it the next occasion. While the details in this text obtain from the service manual and normally should get your equipment working, now and again additional circumstances might be in play.

We will be happy to hear your thoughts

Leave a reply

Shopping cart