Canon-imageRUNNER-2870 E064 0002 Error Code

 

Canon-imageRUNNER-2870 E064 0002 Error Code Instructions

Below you will find the service manual information for the Canon-imageRUNNER-2870 E064 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it. 

Canon-imageRUNNER-2870 E064 0002 Error Code

Service Manual Instructions for the Canon-imageRUNNER-2870 E064 0002 Error Code

E064 0002
Description :
The voltage of the power supply is faulty (high-voltage error).

Causes :
While output is being generated, the AD value of the primary DC voltage is 230 (DEC) or more for 100 msec 2 times in sequence.
(However, after output, it is not detected for 100 msec.)



Solutions :
Replace the high-voltage power supply.
Replace the DC controller PCB.



If you are looking over this short article and have information about this malfunction and would like to contribute make sure you leave a comment below. Or, if you have read this article and have additional questions then ask. If I have exposure to the trouble then I will respond.

Just remember, not every error is exactly identical. What remedies the complication one time may not take care of it the next time. While the advice in this written piece obtain from the service manual and typically should get your piece of equipment up and running, sometimes other things may be in play.

We will be happy to hear your thoughts

Leave a reply

Shopping cart