Canon-imageRUNNER-2870 E025 0001 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-2870 E025 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-2870 E025 0001 Error Code
E025 0001
Description :
The hopper motor or the bottle motor is faulty.
Causes :
While the hopper motor is rotating, the motor error lock signal is detected continuously 4 times every 56 msec. Or, while the bottle motor is rotating, the motor error lock signal is detected 22 times in sequence every 10 msec.
Solutions :
Replace the hopper motor.
Replace the bottle motor.
Replace the DC controller PCB.
If you are looking over this short article and have exposure to this error message and would like to make a contribution be sure to leave a comment underneath. Or, if you have read this article and have more questions then ask. If I have knowledge about the problem then I will respond.
Just remember, not every error is exactly alike. What fixes the trouble one time might not take care of it the next occasion. While the tips in this page comes from the service manual and most often should get your equipment working, occasionally other reasons could possibly be in play.
