Canon-imageRUNNER-2870 E014 0002 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-2870 E014 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-2870 E014 0002 Error Code
E014 0002
Description :
The rotation of the fixing motor is faulty.
Causes :
During motor rotation, detection is executed every 100 msec; however, the drive signal is absent 5 times in sequence.
Solutions :
Replace the fixing motor.
Replace the DC controller PCB.
If you are looking over this short article and have experience with this malfunction and want to make a contribution please leave a comment down the page. Or, if you have read this article and have additional questions then ask. If I have exposure to the situation then I will answer back.
Just remember, not every error is entirely the same. What corrects the problem one occasion might not fix it the next time. While the specifics in this post hails from the service manual and most likely ought to get your piece of equipment functioning, occasionally other elements can be in play.
