Canon-imageRUNNER-2870 E010 0002 Error Code

 

Canon-imageRUNNER-2870 E010 0002 Error Code Instructions

Below you will find the service manual information for the Canon-imageRUNNER-2870 E010 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it. 

Canon-imageRUNNER-2870 E010 0002 Error Code

Service Manual Instructions for the Canon-imageRUNNER-2870 E010 0002 Error Code

E010 0002
Description :
The rotation of the main motor is faulty.

Causes :
During motor rotation, detection is executed every 100 msec; however, the drive signal is absent 5 times in sequence.




Solutions :
Replace the main motor.
Replace the DC controller PCB.



If you are looking over this short article and have experience with this fault and would like to contribute please make sure to leave a comment down the page. Or, if you have read this article and have further questions then ask. If I have exposure to the issue then I will answer back.

Just remember, not every error is entirely identical. What treats the trouble one occasion will possibly not resolve it the next time. While the specifics in this writing derives from the service manual and normally ought to get your product ready to go, sometimes other things could possibly be in play.

We will be happy to hear your thoughts

Leave a reply

Shopping cart