Canon-imageRUNNER-2870 E007 0000 Error Code

 

Canon-imageRUNNER-2870 E007 0000 Error Code Instructions

Below you will find the service manual information for the Canon-imageRUNNER-2870 E007 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it. 

Canon-imageRUNNER-2870 E007 0000 Error Code

Service Manual Instructions for the Canon-imageRUNNER-2870 E007 0000 Error Code

E007 0000
Description :
The rotation of the fixing film is faulty.

Causes :
While the fixing motor is rotating, the marker signal is not detected for 6 sec with the reading of the main thermistor indicating 100 deg C or more.




Solutions :
Reset the condition in service mode: COPIER>FUNCTION>CLEAR>ERR.
Replace the main thermistor.
Replace the DC controller PCB.


Canon FM3-1278-000 Fuser (Fixing) Unit – 120 Volt (Genuine) – $549.95

Canon imageRUNNER 2870 Fuser Removal and Replacement FM3-1278-000, FM2-0356-000


Canon imageRUNNER 2870 E000, E001, E002, E003, Error Code Reset

If you are looking over this short article and have experience with this error message and would wish to make a contribution please make sure to leave a comment underneath. Or, if you have read this article and have additional questions then ask. If I have experience with the trouble then I will answer.

Just remember, not every error is entirely identical. What fixes the malfunction one occasion may not fix it the next time. While the content in this document is inspired by the service manual and usually should get your equipment operating, at times other elements might be in play.

We will be happy to hear your thoughts

Leave a reply

Shopping cart