Canon-imageRUNNER-2870 E001 0000 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-2870 E001 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-2870 E001 0000 Error Code
E001 0000
Description :
The temperature of the fixing assembly is abnormally high.
Causes :
The reading of the main thermistor is 250 deg C or more continuously for 200 msec.
Solutions :
Reset the condition in service mode:COPIER>FUNCTION>CLEAR>ERR.
Replace the main thermistor.
Replace the DC controller PCB.
Canon FM3-1278-000 Fuser (Fixing) Unit – 120 Volt (Genuine) – $549.95
Canon imageRUNNER 2870 Fuser Removal and Replacement FM3-1278-000, FM2-0356-000
Canon imageRUNNER 2870 E000, E001, E002, E003, Error Code Reset
If you are looking over this post and have knowledge of this fault and would like to make a contribution please leave a comment down below. Or, if you have read this article and have further questions then ask. If I have experience with the trouble then I will reply.
Just remember, not every error is completely the same. What treats the issue one time might not resolve it the next occasion. While the content in this blog post originates from the service manual and typically ought to get your device operating, on occasion additional circumstances may be in play.
