Canon-imageRUNNER-2830 E748 1001 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-2830 E748 1001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-2830 E748 1001 Error Code
E748 1001
Description :
There is a mismatch between controller board and SDRAM size.
Causes :
There is a mismatch between the control board and the SDRAM.
Solutions :
Check the correct combination between board and SDRAM.
If you are looking over this post and have knowledge of this error and desire to share make sure you leave a comment beneath. Or, if you have read this article and have more questions then ask. If I have experience with the issue then I will reply.
Just remember, not every error is completely the same. What fixes the condition one time might not exactly remedy it the next occasion. While the advice in this page comes from the service manual and most often ought to get your device up and running, sometimes other variables might be in play.
