Canon-imageRUNNER-2830 E743 0000 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-2830 E743 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-2830 E743 0000 Error Code
E743 0000
Description :
There is an error in the DDI communication.
Causes :
An SCI error has occurred. The received data is faulty. A reception timeout condition has occurred. An SEQ timeout error has occurred.
Solutions :
Disconnect and then connect the flexible cable used to connect the reader unit and the printer unit.
Replace the following as necessary: flexible cable, reader controller PCB, main controller PCB.
If you are looking over this post and have expertise in this fault and wish to share please be sure to leave a comment underneath. Or, if you have read this article and have further questions then ask. If I have exposure to the trouble then I will answer back.
Just remember, not every error is absolutely identical. What fixes the trouble one time might not resolve it the next time. While the tips in this document is taken from the service manual and in most cases ought to get your product up and running, at times additional circumstances could possibly be in play.
