Canon-imageRUNNER-2830 E730 9004 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-2830 E730 9004 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-2830 E730 9004 Error Code
E730 9004
Description :
There is a PDL software error.
Causes :
There is an error in the communication (PAI) with an external controller.
Solutions :
1. Turn on the power once main.
2. Check the connection of the open I/F board and the cable.
3. Replace the board for the external controller open I/F.
4. Replace the main board.
If you are looking over this piece of content and have knowledge about this malfunction and desire to contribute please leave a comment below. Or, if you have read this article and have further questions then ask. If I have information about the trouble then I will answer.
Don’t forget, not every error is simply the same. What treats the complication one time might not exactly remedy it the next occasion. While the ideas in this post is taken from the service manual and typically ought to get your machine working, from time to time other things could possibly be in play.
