Canon-imageRUNNER-2830 E674 0001 Error Code

 

Canon-imageRUNNER-2830 E674 0001 Error Code Instructions

Below you will find the service manual information for the Canon-imageRUNNER-2830 E674 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it. 

Canon-imageRUNNER-2830 E674 0001 Error Code

Service Manual Instructions for the Canon-imageRUNNER-2830 E674 0001 Error Code

E674 0001
Description :
An error has occurred in communication between the fax control PCB (2-line) and main controller PCB.

Causes :
An attempt to set mode for the fax device has failed.




Solutions :
1. Check the connection of the cable between the fax control PCB (2-line) and the main controller PCB.
2. Replace the ROM DIMM of the fax control PCB (2-line).
3. Replace the fax control PCB (2-line).
4. Replace the main controller PCB.


If you are looking over this piece of content and have experience with this error message and would like to contribute be sure to leave a comment underneath. Or, if you have read this article and have additional questions then ask. If I have knowledge about the issue then I will reply.

Don’t forget, not every error is exactly identical. What fixes the trouble one occasion might not resolve it the next occasion. While the tips in this writing originates from the service manual and typically ought to get your product working, at times other variables might be in play.

We will be happy to hear your thoughts

Leave a reply

Shopping cart