Canon-imageRUNNER-2830 E110 0003 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-2830 E110 0003 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-2830 E110 0003 Error Code
E110 0003
Description :
The scanner motor is faulty.
Causes :
With the image clock switched over, the scanner motor speed lock signal does not indicate a locked state 6.5 sec after a switchover is made from low to normal speed or 8 sec after a switchover is made from normal to low speed.
Solutions :
Replace the laser unit.
Replace the DC controller PCB.
Check the wiring.
If you are looking over this document and have knowledge about this error and wish to share please be sure to leave a comment down the page. Or, if you have read this article and have more questions then ask. If I have information about the problem then I will reply.
Don’t forget, not every error is completely alike. What corrects the situation one time might not exactly remedy it the next occasion. While the guidance in this article originates from the service manual and most likely ought to get your piece of equipment working, at times other things could possibly be in play.
