Canon-imageRUNNER-2830 E110 0002 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-2830 E110 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-2830 E110 0002 Error Code
E110 0002
Description :
The scanner motor is faulty.
Causes :
The speed lock signal indicates a deviation 10 times in sequence at intervals of 10 msec after the signal has indicated a locked state.
Solutions :
Replace the laser unit.
Replace the DC controller PCB.
Check the wiring.
If you are looking over this document and have information about this fault and would wish to make a contribution please make sure to leave a comment underneath. Or, if you have read this article and have additional questions then ask. If I have information about the difficulty then I will answer back.
Don’t forget, not every error is completely alike. What corrects the situation one occasion might not exactly get rid of it the next time. While the info in this short article comes from the service manual and most likely ought to get your unit up and running, on occasion other factors may be in play.
