Canon-imageRUNNER-2830 E100 0001 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-2830 E100 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-2830 E100 0001 Error Code
E100 0001
Description :
The BD interval is outside a specific range.
Causes :
After the machine has become ready for image formation (i.e., the scanner motor is ready for operation, and the laser has been turned on), an error has occurred 50 times or more (BD error).
Solutions :
Replace the laser unit.
Replace the DC controller PCB.
Check the wiring.
If you are looking over this document and have exposure to this problem and would like to share please leave a comment down the page. Or, if you have read this article and have further questions then ask. If I have exposure to the situation then I will reply.
Don’t forget, not every error is absolutely the same. What remedies the problem one time might not exactly fix it the next occasion. While the details in this short article hails from the service manual and most often ought to get your product working, in some cases other causes can be in play.
