Canon-imageRUNNER-2830 E064 0005 Error Code

 

Canon-imageRUNNER-2830 E064 0005 Error Code Instructions

Below you will find the service manual information for the Canon-imageRUNNER-2830 E064 0005 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it. 

Canon-imageRUNNER-2830 E064 0005 Error Code

Service Manual Instructions for the Canon-imageRUNNER-2830 E064 0005 Error Code

E064 0005
Description :
The voltage of the power supply is faulty (high-voltage error).

Causes :
While output is being generated, the AD value of the transfer output voltage is 0 (DEC) for 100 msec 2 times in sequence.
(However, after output, it is not detected for 100 msec.)



Solutions :
Replace the high-voltage power supply.
Replace the DC controller PCB.



If you are looking over this document and have exposure to this malfunction and desire to share please be sure to leave a comment below. Or, if you have read this article and have more questions then ask. If I have information about the issue then I will respond.

Don’t forget, not every error is absolutely the same. What remedies the issue one time may possibly not resolve it the next time. While the material in this piece of content is obtained from the service manual and usually ought to get your device functioning, from time to time other things can be in play.

We will be happy to hear your thoughts

Leave a reply

Shopping cart