Canon-imageRUNNER-2830 E064 0003 Error Code

 

Canon-imageRUNNER-2830 E064 0003 Error Code Instructions

Below you will find the service manual information for the Canon-imageRUNNER-2830 E064 0003 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it. 

Canon-imageRUNNER-2830 E064 0003 Error Code

Service Manual Instructions for the Canon-imageRUNNER-2830 E064 0003 Error Code

E064 0003
Description :
The voltage of the power supply is faulty (high-voltage error).

Causes :
While output is being generated, the AD value of the developing DC voltage is 224 (DEC) or more for 10 msec 2 times in sequence. (However, after output, it is not detected for 100 msec.)




Solutions :
Replace the high-voltage power supply.
Replace the DC controller PCB.



If you are looking over this document and have exposure to this error message and want to share be sure to leave a comment underneath. Or, if you have read this article and have additional questions then ask. If I have knowledge about the difficulty then I will respond.

Don’t forget, not every error is absolutely alike. What remedies the trouble one occasion may not fix it the next time. While the material in this writing is taken from the service manual and in most cases should get your unit operating, from time to time other reasons could possibly be in play.

We will be happy to hear your thoughts

Leave a reply

Shopping cart