Canon-imageRUNNER-2830 E014 0002 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-2830 E014 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-2830 E014 0002 Error Code
E014 0002
Description :
The rotation of the fixing motor is faulty.
Causes :
During motor rotation, detection is executed every 100 msec; however, the drive signal is absent 5 times in sequence.
Solutions :
Replace the fixing motor.
Replace the DC controller PCB.
If you are looking over this blog post and have knowledge of this problem and want to share make sure you leave a comment down the page. Or, if you have read this article and have more questions then ask. If I have knowledge about the situation then I will respond.
Do not forget, not every error is totally alike. What treats the difficulty one time might not remedy it the next time. While the guidance in this article derives from the service manual and usually ought to get your piece of equipment working, in some cases other elements could possibly be in play.
