Canon-imageRUNNER-2830 E010 0002 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-2830 E010 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-2830 E010 0002 Error Code
E010 0002
Description :
The rotation of the main motor is faulty.
Causes :
During motor rotation, detection is executed every 100 msec; however, the drive signal is absent 5 times in sequence.
Solutions :
Replace the main motor.
Replace the DC controller PCB.
If you are looking over this blog post and have knowledge about this problem and would like to contribute make sure you leave a comment down the page. Or, if you have read this article and have additional questions then ask. If I have experience with the difficulty then I will answer.
Do not forget, not every error is simply the same. What treats the condition one occasion will possibly not eliminate it the next time. While the info in this blog post obtain from the service manual and usually ought to get your equipment working, sometimes other causes could possibly be in play.
