Canon-imageRUNNER-2830 E010 0001 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-2830 E010 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-2830 E010 0001 Error Code
E010 0001
Description :
The rotation of the main motor is faulty.
Causes :
Detection is executed every 100 msec after the start of motor rotation; however, the drive detection signal is absent for 2 sec.
Solutions :
Replace the main motor.
Replace the DC controller PCB.
If you are looking over this blog post and have knowledge about this fault and desire to contribute please leave a comment underneath. Or, if you have read this article and have more questions then ask. If I have exposure to the problem then I will reply.
Do not forget, not every error is simply the same. What remedies the problem one time will possibly not fix it the next occasion. While the material in this text hails from the service manual and in most cases ought to get your device operating, now and again other things can be in play.
