Canon-imageRUNNER-2830 E001 0002 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-2830 E001 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-2830 E001 0002 Error Code
E001 0002
Description :
The temperature of the fixing assembly is abnormally high.
Causes :
The reading of the sub thermistor is 295 deg C or more continuously for 200 msec.
Solutions :
Reset the condition in service mode: COPIER>FUNCTION>CLEAR>ERR.
Replace the sub thermistor.
Replace the DC controller PCB.
Canon FM3-1278-000 Fuser (Fixing) Unit – 120 Volt (Genuine) – $549.95
Canon imageRUNNER 2830 Fuser Removal and Replacement FM3-1278-000, FM2-0356-000
Canon imageRUNNER 2830 E000, E001, E002, E003, Error Code Reset
If you are looking over this blog post and have experience with this error and would like to make a contribution please be sure to leave a comment beneath. Or, if you have read this article and have additional questions then ask. If I have knowledge about the problem then I will answer.
Do not forget, not every error is simply identical. What remedies the complication one occasion may possibly not remedy it the next occasion. While the data in this article derives from the service manual and typically ought to get your unit up and running, now and again other reasons might be in play.
