Canon-imageRUNNER-2830 E001 0001 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-2830 E001 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-2830 E001 0001 Error Code
E001 0001
Description :
The temperature of the fixing assembly is abnormally high.
Causes :
The hardware circuit detects overheating of the main or sub thermistor for 200 msec.
Solutions :
Reset the condition in service mode: COPIER>FUNCTION>CLEAR>ERR.
Replace the DC controller PCB.
Canon FM3-1278-000 Fuser (Fixing) Unit – 120 Volt (Genuine) – $549.95
Canon imageRUNNER 2830 Fuser Removal and Replacement FM3-1278-000, FM2-0356-000
Canon imageRUNNER 2830 E000, E001, E002, E003, Error Code Reset
If you are looking over this article and have knowledge of this malfunction and would like to make a contribution make sure you leave a comment beneath. Or, if you have read this article and have more questions then ask. If I have knowledge about the problem then I will respond.
Do not forget, not every error is simply identical. What corrects the problem one occasion might not fix it the next occasion. While the information in this blog post is inspired by the service manual and typically ought to get your piece of equipment operating, at times other causes might be in play.
