Canon-imageRUNNER-2830 E001 0000 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-2830 E001 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-2830 E001 0000 Error Code
E001 0000
Description :
The temperature of the fixing assembly is abnormally high.
Causes :
The reading of the main thermistor is 250 deg C or more continuously for 200 msec.
Solutions :
Reset the condition in service mode:COPIER>FUNCTION>CLEAR>ERR.
Replace the main thermistor.
Replace the DC controller PCB.
Canon FM3-1278-000 Fuser (Fixing) Unit – 120 Volt (Genuine) – $549.95
Canon imageRUNNER 2830 Fuser Removal and Replacement FM3-1278-000, FM2-0356-000
Canon imageRUNNER 2830 E000, E001, E002, E003, Error Code Reset
If you are looking over this article and have knowledge of this malfunction and would like to contribute please make sure to leave a comment down the page. Or, if you have read this article and have further questions then ask. If I have knowledge about the issue then I will reply.
Do not forget, not every error is simply identical. What corrects the complication one time may not take care of it the next time. While the info in this posting originates from the service manual and normally should get your equipment working, sometimes other causes can be in play.
