Canon-imageRUNNER-2270 E730 9004 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-2270 E730 9004 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-2270 E730 9004 Error Code
E730 9004
Description :
There is a PDL software error.
Causes :
There is an error in the communication (PAI) with an external controller.
Solutions :
1. Turn on the power once main.
2. Check the connection of the open I/F board and the cable.
3. Replace the board for the external controller open I/F.
4. Replace the main board.
If you are looking at this write-up and have knowledge of this error message and would wish to contribute make sure you leave a comment beneath. Or, if you have read this article and have additional questions then ask. If I have experience with the trouble then I will respond.
Do not forget, not every error is entirely alike. What fixes the issue one occasion will possibly not resolve it the next occasion. While the information in this piece of content is obtained from the service manual and oftentimes should get your equipment operational, sometimes other reasons could possibly be in play.
