Canon-imageRUNNER-2270 E716 0000 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-2270 E716 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-2270 E716 0000 Error Code
E716 0000
Description :
There is an error in the communication with the pedestal.
Causes :
After the presence of a pedestal has been detected, the communication fails to be normal for 5 sec.
Solutions :
Check the cable. Replace the DC controller PCB.
Replace the pedestal drive PCB.
If you are looking at this write-up and have information about this fault and would like to make a contribution please make sure to leave a comment underneath. Or, if you have read this article and have additional questions then ask. If I have exposure to the situation then I will answer back.
Do not forget, not every error is completely identical. What corrects the situation one occasion may not solve it the next occasion. While the content in this write-up comes from the service manual and most often should get your device up and running, now and again other elements can be in play.
