Canon-imageRUNNER-2270 E713 0000 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-2270 E713 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-2270 E713 0000 Error Code
E713 0000
Description :
There is an error in the communication with the finisher.
Causes :
The communication with the finisher does not resume within 5 sec after it has been disrupted.
Solutions :
Check the cable.
Replace the DC controller PCB.
Replace the finisher controller PCB.
If you are looking at this write-up and have information about this error message and want to contribute please be sure to leave a comment down the page. Or, if you have read this article and have additional questions then ask. If I have experience with the difficulty then I will answer back.
Do not forget, not every error is completely identical. What corrects the problem one occasion might not exactly eliminate it the next time. While the info in this document comes from the service manual and usually ought to get your piece of equipment working, in some cases additional factors could possibly be in play.
