Canon-imageRUNNER-2270 E710 0002 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-2270 E710 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-2270 E710 0002 Error Code
E710 0002
Description :
There is an error in the initialization of the IPC.
Causes :
When the main power is turned on, the communication IC (IPC) on the DC controller PCB cannot be initialized.
Solutions :
Check the cable.
If you are looking at this write-up and have expertise in this problem and would like to make a contribution you should leave a comment down the page. Or, if you have read this article and have additional questions then ask. If I have exposure to the issue then I will reply.
Do not forget, not every error is absolutely the same. What treats the difficulty one time might not remedy it the next occasion. While the help and advice in this writing is obtained from the service manual and generally ought to get your machine operating, in some cases additional variables can be in play.
