Canon-imageRUNNER-2270 E674 0001 Error Code

 

Canon-imageRUNNER-2270 E674 0001 Error Code Instructions

Below you will find the service manual information for the Canon-imageRUNNER-2270 E674 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it. 

Canon-imageRUNNER-2270 E674 0001 Error Code

Service Manual Instructions for the Canon-imageRUNNER-2270 E674 0001 Error Code

E674 0001
Description :
An error has occurred in communication between the fax control PCB (2-line) and main controller PCB.

Causes :
An attempt to set mode for the fax device has failed.




Solutions :
1. Check the connection of the cable between the fax control PCB (2-line) and the main controller PCB.
2. Replace the ROM DIMM of the fax control PCB (2-line).
3. Replace the fax control PCB (2-line).
4. Replace the main controller PCB.


If you are looking at this write-up and have experience with this error and would wish to contribute you should leave a comment beneath. Or, if you have read this article and have additional questions then ask. If I have experience with the situation then I will answer.

Do not forget, not every error is absolutely identical. What treats the issue one time might not remedy it the next occasion. While the info in this short article originates from the service manual and most likely should get your unit up and running, now and again other reasons may be in play.

We will be happy to hear your thoughts

Leave a reply

Shopping cart