Canon-imageRUNNER-2270 E261 0000 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-2270 E261 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-2270 E261 0000 Error Code
E261 0000
Description :
The zero-cross signal is faulty.
Causes :
When the relay is on, the zerocross signal is not detected for 500 msec or more.
Solutions :
Replace the AC driver PCB.
Replace the DC controller PCB.
If you are looking at this short article and have expertise in this fault and would wish to make a contribution make sure you leave a comment below. Or, if you have read this article and have further questions then ask. If I have exposure to the issue then I will answer.
Bear in mind, not every error is simply identical. What fixes the difficulty one time might not exactly resolve it the next time. While the info in this blog comes from the service manual and generally ought to get your device up and running, on occasion other factors may be in play.
