Canon-imageRUNNER-2270 E227 0002 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-2270 E227 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-2270 E227 0002 Error Code
E227 0002
Description :
The reader unit power supply is faulty.
Causes :
At the start of a job, the 24-V port is off.
Solutions :
Disconnect and then connect the power supply harness connector.
Replace the power supply.
If you are looking at this post and have knowledge of this problem and would wish to share make sure you leave a comment underneath. Or, if you have read this article and have additional questions then ask. If I have experience with the situation then I will respond.
Bear in mind, not every error is precisely the same. What corrects the complication one occasion may possibly not take care of it the next time. While the tips in this page is inspired by the service manual and in most cases should get your equipment working, in some cases other things may be in play.
