Canon-imageRUNNER-2270 E110 0003 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-2270 E110 0003 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-2270 E110 0003 Error Code
E110 0003
Description :
The scanner motor is faulty.
Causes :
With the image clock switched over, the scanner motor speed lock signal does not indicate a locked state 6.5 sec after a switchover is made from low to normal speed or 8 sec after a switchover is made from normal to low speed.
Solutions :
Replace the laser unit.
Replace the DC controller PCB.
Check the wiring.
If you are looking at this post and have information about this problem and want to contribute make sure you leave a comment down below. Or, if you have read this article and have additional questions then ask. If I have knowledge about the difficulty then I will answer back.
Bear in mind, not every error is precisely alike. What corrects the issue one time might not exactly take care of it the next time. While the help and advice in this text originates from the service manual and normally ought to get your piece of equipment working, in some cases other causes might be in play.
