Canon-imageRUNNER-2270 E064 0004 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-2270 E064 0004 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-2270 E064 0004 Error Code
E064 0004
Description :
The voltage of the power supply is faulty (high-voltage error).
Causes :
While output is being generated, the AD value of the transfer output current is 205 (DEC) or more for 100 msec 2 times in sequence. (However, after output, it is not detected for 100 msec.)
Solutions :
Replace the high-voltage power supply.
Replace the controller PCB.
If you are looking at this post and have expertise in this problem and would like to make a contribution please leave a comment down the page. Or, if you have read this article and have more questions then ask. If I have exposure to the problem then I will respond.
Bear in mind, not every error is exactly identical. What fixes the situation one time may not get rid of it the next time. While the data in this short article comes from the service manual and usually should get your piece of equipment operational, in some cases other things may be in play.
