Canon-imageRUNNER-2270 E010 0002 Error Code

 

Canon-imageRUNNER-2270 E010 0002 Error Code Instructions

Below you will find the service manual information for the Canon-imageRUNNER-2270 E010 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it. 

Canon-imageRUNNER-2270 E010 0002 Error Code

Service Manual Instructions for the Canon-imageRUNNER-2270 E010 0002 Error Code

E010 0002
Description :
The rotation of the main motor is faulty.

Causes :
During motor rotation, detection is executed every 100 msec; however, the drive signal is absent 5 times in sequence.




Solutions :
Replace the main motor.
Replace the DC controller PCB.



If you are looking at this piece of content and have knowledge of this problem and want to contribute make sure you leave a comment down the page. Or, if you have read this article and have additional questions then ask. If I have experience with the trouble then I will respond.

Bear in mind, not every error is completely the same. What treats the complication one occasion will possibly not resolve it the next occasion. While the info in this write-up hails from the service manual and typically ought to get your machine up and running, on occasion additional variables can be in play.

We will be happy to hear your thoughts

Leave a reply

Shopping cart