Canon-imageRUNNER-2270 E001 0002 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-2270 E001 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-2270 E001 0002 Error Code
E001 0002
Description :
The temperature of the fixing assembly is abnormally high.
Causes :
The reading of the sub thermistor is 295 deg C or more continuously for 200 msec.
Solutions :
Reset the condition in service mode: COPIER>FUNCTION>CLEAR>ERR.
Replace the sub thermistor.
Replace the DC controller PCB.
Canon FM3-1278-000 Fuser (Fixing) Unit – 120 Volt (Genuine) – $549.95
Canon imageRUNNER 2270 Fuser Removal and Replacement FM3-1278-000, FM2-0356-000
Canon imageRUNNER 2270 E000, E001, E002, E003, Error Code Reset
If you are looking at this piece of content and have knowledge about this malfunction and desire to make a contribution you should leave a comment beneath. Or, if you have read this article and have more questions then ask. If I have information about the trouble then I will answer back.
Bear in mind, not every error is completely identical. What treats the issue one occasion might not exactly resolve it the next occasion. While the information in this post comes from the service manual and most likely ought to get your product ready to go, occasionally other elements may be in play.
