Canon-imageRUNNER-2270 E001 0001 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-2270 E001 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-2270 E001 0001 Error Code
E001 0001
Description :
The temperature of the fixing assembly is abnormally high.
Causes :
The hardware circuit detects overheating of the main or sub thermistor for 200 msec.
Solutions :
Reset the condition in service mode: COPIER>FUNCTION>CLEAR>ERR.
Replace the DC controller PCB.
Canon FM3-1278-000 Fuser (Fixing) Unit – 120 Volt (Genuine) – $549.95
Canon imageRUNNER 2270 Fuser Removal and Replacement FM3-1278-000, FM2-0356-000
Canon imageRUNNER 2270 E000, E001, E002, E003, Error Code Reset
If you are looking at this piece of content and have knowledge about this malfunction and desire to contribute make sure you leave a comment below. Or, if you have read this article and have additional questions then ask. If I have information about the situation then I will respond.
Bear in mind, not every error is completely identical. What treats the complication one occasion will possibly not fix it the next time. While the ideas in this blog post obtain from the service manual and in most cases ought to get your unit operational, sometimes other causes might be in play.
