Canon-imageRUNNER-2230 E730 A006 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-2230 E730 A006 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-2230 E730 A006 Error Code
E730 A006
Description :
There is a PDL software error.
Causes :
The PDL board does not respond.
A subbootable is faulty or absent.
Solutions :
1. Execute PDL resetting.
2. Turn on the power once again.
3. Check the connection of the SURF board.
4. Re-install the firmware.
5. Replace the main board.
If you are looking at this page and have information about this error and wish to make a contribution please make sure to leave a comment down the page. Or, if you have read this article and have further questions then ask. If I have exposure to the difficulty then I will respond.
Always remember, not every error is totally identical. What treats the trouble one occasion will possibly not eliminate it the next occasion. While the tips in this text derives from the service manual and most likely should get your unit functioning, occasionally additional variables can be in play.
