Canon-imageRUNNER-2230 E730 9004 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-2230 E730 9004 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-2230 E730 9004 Error Code
E730 9004
Description :
There is a PDL software error.
Causes :
There is an error in the communication (PAI) with an external controller.
Solutions :
1. Turn on the power once main.
2. Check the connection of the open I/F board and the cable.
3. Replace the board for the external controller open I/F.
4. Replace the main board.
If you are looking at this page and have exposure to this malfunction and desire to share make sure you leave a comment underneath. Or, if you have read this article and have additional questions then ask. If I have exposure to the difficulty then I will answer back.
Always remember, not every error is totally identical. What remedies the complication one occasion may possibly not eliminate it the next occasion. While the details in this article hails from the service manual and in most cases ought to get your piece of equipment functioning, on occasion other reasons can be in play.
