Canon-imageRUNNER-2230 E716 0000 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-2230 E716 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-2230 E716 0000 Error Code
E716 0000
Description :
There is an error in the communication with the pedestal.
Causes :
After the presence of a pedestal has been detected, the communication fails to be normal for 5 sec.
Solutions :
Check the cable. Replace the DC controller PCB.
Replace the pedestal drive PCB.
If you are looking at this document and have knowledge of this problem and would wish to make a contribution please make sure to leave a comment below. Or, if you have read this article and have more questions then ask. If I have knowledge about the difficulty then I will respond.
Always remember, not every error is simply identical. What treats the situation one time might not fix it the next time. While the help and advice in this written piece comes from the service manual and most likely ought to get your equipment working, now and again other variables could possibly be in play.
