Canon-imageRUNNER-2230 E674 0001 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-2230 E674 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-2230 E674 0001 Error Code
E674 0001
Description :
An error has occurred in communication between the fax control PCB (2-line) and main controller PCB.
Causes :
An attempt to set mode for the fax device has failed.
Solutions :
1. Check the connection of the cable between the fax control PCB (2-line) and the main controller PCB.
2. Replace the ROM DIMM of the fax control PCB (2-line).
3. Replace the fax control PCB (2-line).
4. Replace the main controller PCB.
If you are looking at this document and have knowledge about this fault and would wish to share please leave a comment underneath. Or, if you have read this article and have additional questions then ask. If I have information about the situation then I will respond.
Always remember, not every error is simply identical. What corrects the situation one occasion will possibly not solve it the next occasion. While the info in this post is taken from the service manual and most often should get your piece of equipment operational, from time to time additional factors can be in play.
