Canon-imageRUNNER-2230 E248 0000 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-2230 E248 0000 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-2230 E248 0000 Error Code
E248 0000
Description :
The backup memory is faulty.
Causes :
[Cause] A check error has occurred on the backup SRAM board.
[Location] bottom ROM
[Timing of Detection] once when the boot ROM is started up
Solutions :
1. Check the presence/absence of a backup SRAM PCB.
2. Disconnect and then connect the backup SRAM PCB.
3. Replace the backup SRAM PCB with a new one.
If you are looking at this document and have experience with this fault and desire to share you should leave a comment underneath. Or, if you have read this article and have further questions then ask. If I have knowledge about the issue then I will reply.
Always remember, not every error is exactly alike. What remedies the trouble one occasion may not solve it the next occasion. While the tips in this written piece comes from the service manual and generally ought to get your unit ready to go, sometimes other things could possibly be in play.
