Canon-imageRUNNER-2230 E227 0004 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-2230 E227 0004 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-2230 E227 0004 Error Code
E227 0004
Description :
The reader unit power supply is faulty.
Causes :
When a load is being driven, the 24-V port is off.
Solutions :
Disconnect and then connect the power supply harness.
Replace the power supply.
If you are looking at this document and have experience with this fault and desire to make a contribution be sure to leave a comment down below. Or, if you have read this article and have further questions then ask. If I have experience with the situation then I will respond.
Always remember, not every error is exactly alike. What remedies the malfunction one time might not fix it the next occasion. While the information in this blog post is taken from the service manual and oftentimes should get your equipment operational, from time to time additional circumstances may be in play.
