Canon-imageRUNNER-2230 E110 0003 Error Code

 

Canon-imageRUNNER-2230 E110 0003 Error Code Instructions

Below you will find the service manual information for the Canon-imageRUNNER-2230 E110 0003 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it. 

Canon-imageRUNNER-2230 E110 0003 Error Code

Service Manual Instructions for the Canon-imageRUNNER-2230 E110 0003 Error Code

E110 0003
Description :
The scanner motor is faulty.

Causes :
With the image clock switched over, the scanner motor speed lock signal does not indicate a locked state 6.5 sec after a switchover is made from low to normal speed or 8 sec after a switchover is made from normal to low speed.




Solutions :
Replace the laser unit.
Replace the DC controller PCB.
Check the wiring.


If you are looking at this blog post and have exposure to this error message and would like to contribute please leave a comment down the page. Or, if you have read this article and have additional questions then ask. If I have exposure to the issue then I will answer back.

Always remember, not every error is entirely identical. What corrects the malfunction one occasion might not fix it the next occasion. While the data in this document obtain from the service manual and in most cases ought to get your piece of equipment up and running, on occasion additional variables may be in play.

We will be happy to hear your thoughts

Leave a reply

Shopping cart