Canon-imageRUNNER-2230 E110 0002 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-2230 E110 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-2230 E110 0002 Error Code
E110 0002
Description :
The scanner motor is faulty.
Causes :
The speed lock signal indicates a deviation 10 times in sequence at intervals of 10 msec after the signal has indicated a locked state.
Solutions :
Replace the laser unit.
Replace the DC controller PCB.
Check the wiring.
If you are looking at this blog post and have expertise in this fault and want to share make sure you leave a comment underneath. Or, if you have read this article and have further questions then ask. If I have knowledge about the problem then I will answer back.
Always remember, not every error is entirely alike. What treats the difficulty one occasion might not exactly take care of it the next occasion. While the content in this writing comes from the service manual and generally ought to get your equipment working, on occasion other reasons could possibly be in play.
