Canon-imageRUNNER-2230 E100 0001 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-2230 E100 0001 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-2230 E100 0001 Error Code
E100 0001
Description :
The BD interval is outside a specific range.
Causes :
After the machine has become ready for image formation (i.e., the scanner motor is ready for operation, and the laser has been turned on), an error has occurred 50 times or more (BD error).
Solutions :
Replace the laser unit.
Replace the DC controller PCB.
Check the wiring.
If you are looking at this blog post and have experience with this problem and would wish to contribute please be sure to leave a comment down below. Or, if you have read this article and have more questions then ask. If I have knowledge about the difficulty then I will answer back.
Always remember, not every error is completely the same. What treats the issue one time will possibly not fix it the next occasion. While the guidance in this document comes from the service manual and generally should get your piece of equipment ready to go, from time to time additional factors might be in play.
