Canon-imageRUNNER-2230 E064 0005 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-2230 E064 0005 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-2230 E064 0005 Error Code
E064 0005
Description :
The voltage of the power supply is faulty (high-voltage error).
Causes :
While output is being generated, the AD value of the transfer output voltage is 0 (DEC) for 100 msec 2 times in sequence.
(However, after output, it is not detected for 100 msec.)
Solutions :
Replace the high-voltage power supply.
Replace the DC controller PCB.
If you are looking at this blog post and have experience with this malfunction and want to make a contribution you should leave a comment down below. Or, if you have read this article and have additional questions then ask. If I have experience with the issue then I will answer.
Always remember, not every error is completely the same. What treats the issue one occasion may possibly not get rid of it the next occasion. While the help and advice in this write-up obtain from the service manual and most likely ought to get your unit working, at times additional factors can be in play.
