Canon-imageRUNNER-2230 E014 0002 Error Code Instructions
Below you will find the service manual information for the Canon-imageRUNNER-2230 E014 0002 Error Code along with additional details to explain what can cause the problem and followed by solutions that might help you fix it. If I have additional information from past experiences I will try to add it.Â
Service Manual Instructions for the Canon-imageRUNNER-2230 E014 0002 Error Code
E014 0002
Description :
The rotation of the fixing motor is faulty.
Causes :
During motor rotation, detection is executed every 100 msec; however, the drive signal is absent 5 times in sequence.
Solutions :
Replace the fixing motor.
Replace the DC controller PCB.
If you are looking at this article and have information about this error and want to share make sure you leave a comment underneath. Or, if you have read this article and have additional questions then ask. If I have exposure to the situation then I will reply.
Always remember, not every error is absolutely the same. What treats the trouble one time will possibly not eliminate it the next occasion. While the info in this post obtain from the service manual and most often ought to get your machine functioning, from time to time other factors could possibly be in play.
